|
تفاصيل المنتج:
اتصل
نتحدث الآن
|
| اسم: | ربيع الضغط | تصنيع المعدات الأصلية/تصنيع التصميم الشخصي: | المدعومة |
|---|---|---|---|
| عينة: | متاح | إصدار الشهادات: | ISO13485；ISO14001；IATF16949 |
| المعالجة السطحية: | مطلي بالزنك، مطلي بالنيكل، مطلي بالكروم، أكسيد أسود، رحلان كهربائي، طلاء مسحوق، التخميل، لا شيء | نوع النهاية: | النهايات المغلقة، النهايات المفتوحة، النهايات الأرضية، النهايات المغلقة والأرضية |
| طلب: | السيارات والطبية والإلكترونيات والمعدات الصناعية والآلات الزراعية والفضاء والمنتجات الاستهلاكية | مادة: | الفولاذ المقاوم للصدأ (304، 316، 302)، سلك الموسيقى، الفولاذ الكربوني، سلك مقسى بالزيت، سيليكون الكر |
| إبراز: | ODM long compression springs,Passivation long compression springs,ODM 12 inch compression spring |
||
We specialize in manufacturing industrial compression springs for machinery, automation equipment, tools, and engineering applications. Our springs are designed to provide stable force output and long-term reliability under continuous operation. By combining advanced manufacturing technology with strict inspection procedures, we ensure every compression spring meets international quality standards and customer expectations.
Technical parameters of cylindrical spiral compression spring
| To customize the compression spring, you need to provide the following necessary parameter information: | ||
| Wire diameter d: mm | (Note: the diameter of the spring wire) | |
| Outer diameter D2: mm | (Note: the diameter of the outer circle of the spring) | |
| Length L0: mm | (Note: the free height of the spring) | |
| Number of circles Na: circle | (Note: the total number of turns of the spring) | |
| For customized compression springs, you also need to provide the following technical requirements: | ||
| turn around: | (Description: Left-handed Right-handed) | |
| Material requirements: | (Such as: stainless steel wire SUS, carbon steel wire SWC, piano wire SWP, copper wire... etc.) | |
| Surface treatment: | (Description: blackening/galvanizing/nickel plating/chrome plating/baking paint/powder spraying/electrophoresis/shot peening/dacromet/electrolytic polishing...etc.) | |
| End form: | (Explanation: Tighten Grind Tightly polish) | |
| Strength requirements: | (Note: Elastic performance, other technical requirements, etc.) | |
Spring end characteristics
| Characteristic | Parameter |
|---|---|
| Cylindrical |
| Hourglass | |
| Shrink both ends | |
| Fixed pitch | |
| Conical | |
| Closed at both ends | |
| The ends are flat | |
| Variable pitch | |
| Barrel | |
| Two End opening | |
| The ends are not flat | |
| Blackening |
| Shot Peening | |
| Apply anti-rust oil | |
| Zinc plating | |
| Polishing | |
| Electrolytic polishing | |
| Nickel plating | |
| Dacromet | |
| Teflon spray | |
| Carbon spring steel wire SWC |
| Piano wire SWPB | |
| Stainless steel wire SUS301, SUS302, SUS304, SUS316, SUS631 | |
| 65Mn | |
| 82B | |
| 55CrSi (SWOSC-V) | |
| Nickel-plated wire, galvanized wire | |
| Copper wire, phosphor copper wire, beryllium copper wire | |
| Square wire, flat wire, semicircular wire | |
| Alloy material wire | |
| Other special specifications steel wire | |
| Wire diameter specifications | 0.1~6mm |
اتصل شخص: Mr. Zhiyuan Yu
الهاتف :: +8613815003598
